The Model 6 continues the design philosophy of other Aerial speakers. The woofer was developed specifically for the Model 6. It employs a large vented magnet, a long-throw 40 mm diameter coil, and a cast magnesium frame. Bass is quick, dynamic, and clear. The critical midrange is handled by an unshielded version of the highly acclaimed Model CC3 midrange driver. Midrange is natural and well resolved. The tweeter is Aerial's exclusive, highly refined 10T tweeter. It provides delicate, open, extended highs without harshness. The bi-wirable network is built on a large glass epoxy circuit board using high quality components and wiring throughout.

All cabinets are mirror-imaged matched pairs using the finest veneers finished to a very high standard. In addition the veneers are book-matched for symmetry on each side. The finish quality is exceptionally high. The optional stands allow tilt-back and are highly recommended for critical listening. They improve clarity especially on wood floors while increasing lateral stability.

‍

SPECIFICATIONS

‍Frequency Response 38 Hz to 22 kHz ± 2 dB, -6 dB at 34Hz

Sensitivity 85 dB for 2.83 volts at 1.0 meter

Impedance 6 Ohms, 4 Ohms minimum, low reactance

Power Requirements 50 to 200 Watts (8 Ohm Rating) recommended

Drivers 1 x 7.1" diameter , 1 x 5.0" diameter, 1 x 1" diameter

Connections Gold-plated bi-wire binding posts

Optional Accessories: Adjustable angle stands with spikes*

Dimensions (hwd) 39.0 x 7.25 x 12.0 inches, 990 x 184 x 305mm

Weight Each 60lbs / 27kg

‍

‍

‍

Adjustable angle stands with spikes* - inluded

‍